RJCP.Diagnostics.Log.Dlt 0.8.1

.NET 6.0 This package targets .NET 6.0. The package is compatible with this framework or higher. 
dotnet add package RJCP.Diagnostics.Log.Dlt --version 0.8.1                

                    
                

            
NuGet\Install-Package RJCP.Diagnostics.Log.Dlt -Version 0.8.1
This command is intended to be used within the Package Manager Console in Visual Studio, as it uses the NuGet module's version of Install-Package. 
<PackageReference Include="RJCP.Diagnostics.Log.Dlt" Version="0.8.1" />
For projects that support PackageReference, copy this XML node into the project file to reference the package. 
paket add RJCP.Diagnostics.Log.Dlt --version 0.8.1                

                    
                

            
#r "nuget: RJCP.Diagnostics.Log.Dlt, 0.8.1"
#r directive can be used in F# Interactive and Polyglot Notebooks. Copy this into the interactive tool or source code of the script to reference the package. 
// Install RJCP.Diagnostics.Log.Dlt as a Cake Addin
#addin nuget:?package=RJCP.Diagnostics.Log.Dlt&version=0.8.1

// Install RJCP.Diagnostics.Log.Dlt as a Cake Tool
#tool nuget:?package=RJCP.Diagnostics.Log.Dlt&version=0.8.1

RJCP.Diagnostics.Log.Dlt Project

1. DLT Trace Reader

The DLT Trace Reader implements version 1 of the AutoSAR Diagnostics Log and Trace Protocol Specification R20-11.

It is used by the DltDump application.

1.1. Reading

It implements reading streams from:

It supports the AutoSAR DLT version 1 packet, in three variants:

  • As a network stream, i.e. in the format streamed from logging devices
  • Stored on disk, with a storage header
  • Sent over serial port with an (undocumented) serial header, in the same format as the Covesa DLT Viewer.

It can interpret Non-Verbose streams based on the FIBEX file format and convert them to a verbose string.

It supports most of the data types defined in the AutoSAR standard, including:

  • Boolean BOOL
  • Signed Int SINT
  • Unsigned Int UINT
    • With additional Integer Coding (Hex, Octal, Binary, Decimal)
  • Float FLOA
  • Raw RAWD
  • Strings STRG
    • With String Coding ASCII and UTF-8 (SCOD) being stricter than Covesa.

Not implemented are:

  • Arrays ARAY
  • Structures (STRU)
  • Variable Info (VARI)
  • Fixed Point (FIXP)
  • Trace Info (TRAI)

It adds extra heuristics to try and determine corrupted data, by checking the length of verbose payloads with the packet payload (looking for errors in datastreams), and tries to synchronise where possible.

The output of the string tries to be compatible with the same output given by the Covesa DLT Viewer.

1.2. Constraints

Various constraints are added for fast filtering of DLT lines.

  • DltAppId
  • DltCtxId
  • DltEcuId
  • DltIsControl
  • DltIsVerbose
  • DltMessageId
  • DltMessageType
  • DltSessionId

These can be used in addition the constraints defined by the RJCP.Diagnostics.Log package.

1.3. Control Messages

The reading and interpreting of various control messages over multiple versions of the standard is supported (so long as the control message identifiers don't conflict).

The X indicates the control message is implemented.

Service Id Name Request Response Standard
0x01 SetLogLevel R/W R/W PRS 1.4.0
0x02 SetTraceStatus R/W R/W PRS 1.4.0
0x03 GetLogInfo R/W R/W PRS 1.4.0
0x04 GetDefaultLogLevel R/W R/W PRS 1.4.0
0x05 StoreConfiguration R/W R/W PRS 1.4.0
0x06 ResetToFactoryDefault R/W R/W PRS 1.4.0
0x07 SetComInterfaceStatus¹ SWS 4.2.2
0x08 SetComInterfaceMaxBandwidth¹ SWS 4.2.2
0x09 SetVerboseMode¹ R/W R/W SWS 4.2.2
0x0A SetMessageFiltering R/W R/W PRS 1.4.0
0x0B SetTimingPackets R/W R/W SWS 4.2.2
0x0C GetLocalTime¹ R/W R/W SWS 4.2.2
0x0D SetUseECUID¹ R/W R/W SWS 4.2.2
0x0E SetUseSessionId¹ R/W R/W SWS 4.2.2
0x0F UseTimestamp¹ R/W R/W SWS 4.2.2
0x10 UseExtendedHeader¹ R/W R/W SWS 4.2.2
0x11 SetDefaultLogLevel R/W R/W PRS 1.4.0
0x12 SetDefaultTraceStatus R/W R/W PRS 1.4.0
0x13 GetSoftwareVersion R/W R/W PRS 1.4.0
0x14 MessageBufferOverflow¹ R/W R/W SWS 4.2.2
0x15 GetDefaultTraceStatus R/W R/W PRS 1.4.0
0x17 GetLogChannelNames PRS 1.4.0
0x16 GetComInterfaceStatus¹ SWS 4.2.2
0x17 GetComInterfaceNames² SWS 4.2.2
0x18 GetComInterfaceMaxBandwidth¹ SWS 4.2.2
0x19 GetVerboseModeStatus¹ R/W R/W SWS 4.2.2
0x1A GetMessageFilteringStatus¹ R/W R/W SWS 4.2.2
0x1B GetUseECUID¹ R/W R/W SWS 4.2.2
0x1C GetUseSessionID¹ R/W R/W SWS 4.2.2
0x1D GetUseTimestamp¹ R/W R/W SWS 4.2.2
0x1E GetUseExtendedHeader¹ R/W R/W SWS 4.2.2
0x1F GetTraceStatus R/W R/W PRS 1.4.0
0x20 SetLogChannelAssignment PRS 1.4.0
0x21 SetLogChannelThreshold PRS 1.4.0
0x22 GetLogChannelThreshold PRS 1.4.0
0x23 BufferOverflowNotification R/W R/W PRS 1.4.0
0x24 SyncTimeStamp R/W R/W PRS R19-11
0xF01 Unregister Context N/A R/W
0xF02 Connection Info N/A R/W
0xF03 TimeZone Info N/A R/W
0xF04 Marker N/A R/W
0xFFF..0xFFFFFFFF CallSWCInjection R R PRS 1.4.0

2. DLT Trace Writer

The DltTraceWriterFactory allows to create a DltTraceWriter that can be used to write a trace line to disk. This allows one to implement tooling to read log files (e.g. event logs, journals) and write out as DLT (for example, over the network).

It supports writing verbose and control messages, as DLTv1 packets.

It does not support writing non-verbose messages.

If access to the raw payload is needed, extend the DltTraceDecoderBase.CheckLine in your own class. The payload is not exposed to a DltTraceLine to avoid an unnecessary copy. This could allow reading a packet that is a non-verbose raw message, and instead of using the DltWriter, write the original line (for example, this filtering is done by DltDump).

3. Release History

3.1. Version 0.8.1

Bugfixes:

  • Workaround corrupted verbose with no arguments (DOTNET-921)

Quality:

  • Add README.md to NuGet package (DOTNET-816, DOTNET-817, DOTNET-932)
  • Mark common secondary warnings as Verbose (DOTNET-922)
  • Upgrade to .NET 6.0 (DOTNET-936, DOTNET-942, DOTNET-943, DOTNET-945, DOTNET-951)
  • Update to .NET 8.0 (DOTNET-982, DOTNET-983, DOTNET-989, DOTNET-990)

3.2. Version 0.8.0

  • Initial Release
Product Compatible and additional computed target framework versions.
.NET net6.0 is compatible.  net6.0-android was computed.  net6.0-ios was computed.  net6.0-maccatalyst was computed.  net6.0-macos was computed.  net6.0-tvos was computed.  net6.0-windows was computed.  net7.0 was computed.  net7.0-android was computed.  net7.0-ios was computed.  net7.0-maccatalyst was computed.  net7.0-macos was computed.  net7.0-tvos was computed.  net7.0-windows was computed.  net8.0 is compatible.  net8.0-android was computed.  net8.0-browser was computed.  net8.0-ios was computed.  net8.0-maccatalyst was computed.  net8.0-macos was computed.  net8.0-tvos was computed.  net8.0-windows was computed. 
Compatible target framework(s)
Included target framework(s) (in package)
Learn more about Target Frameworks and .NET Standard.

NuGet packages

This package is not used by any NuGet packages.

GitHub repositories

This package is not used by any popular GitHub repositories.

Version Downloads Last updated
0.8.1 167 3/9/2024
0.8.0 180 6/9/2023