AVCoders.Matrix
2026.10.1
Prefix Reserved
dotnet add package AVCoders.Matrix --version 2026.10.1
NuGet\Install-Package AVCoders.Matrix -Version 2026.10.1
<PackageReference Include="AVCoders.Matrix" Version="2026.10.1" />
<PackageVersion Include="AVCoders.Matrix" Version="2026.10.1" />
<PackageReference Include="AVCoders.Matrix" />
paket add AVCoders.Matrix --version 2026.10.1
#r "nuget: AVCoders.Matrix, 2026.10.1"
#:package AVCoders.Matrix@2026.10.1
#addin nuget:?package=AVCoders.Matrix&version=2026.10.1
#tool nuget:?package=AVCoders.Matrix&version=2026.10.1
AVCoders.Matrix
Matrix switcher and AV-over-IP drivers for the AV Coders device library. Built on AVCoders.Core. Targets .NET 8.0 and .NET 10.0.
Install
dotnet add package AVCoders.Matrix
Published to nuget.org. See the repository README for details.
Drivers
ExtronIn16Xx,ExtronSw,ExtronDtpCpxx(DTP CrossPoint 82/84/86/108),ExtronDtp2Cp82(DTP2 CrossPoint 82)ExtronIn18Xx— IN1806 / IN1808 scaling switchers. Inputs are discovered from the model reply (EndpointsChangedHandlersfires when the count changes; existing ports are kept) and carry signal presence and HDCP status. Output 1A (HDMI) and 1B (DTP2/HDBT) exist from construction asGetOutputs()[0]and[1]and carry sink detection and HDCP status. The HDMI loop out is not exposed.ExtronAnnotator401VideoMatrix— the HDMI input and two HDMI outputs of an Extron Annotator 401 as a routing-freeVideoMatrix, sharing the annotator's communication client with theAVCoders.Annotatordriver. The endpoints exist from construction and carry sync state and HDCP status; both outputs always show the only input, so the routing methods only log.CiscoRoomOsVideoMatrix— the video inputs and outputs of a Cisco RoomOS / CE codec as a routing-freeVideoMatrix, sharing the codec's communication client with theAVCoders.Conferencedriver. Connectors are discovered from the codec's status (EndpointsChangedHandlersfires as they appear) and carry sync state, resolution, HDCP and history. Input names come from the codec's connector configuration; outputs stay "Output n" and expose the connected display's EDID name asConnectedDeviceName, logged on change.SvsiEncoder,SvsiDecoderAntricaEncoder— the HDMI input of an Antrica ANT-35000 series encoder, polled every 10 seconds over its HTTP API through aRestCommsclient (AvCodersRestClient). Reports signal presence (GIS_VIDEOLOSS1) and the detected input format (VID_INPUTFORMAT, read as decimal or0xhex) as the input resolution. HDCP is alwaysNotSupported. HTTP API authentication (NET_USEHTTPAPIAUTH) is not supported.BlustreamAmf41WNavigator,NavEncoder,NavDecoderAVoIPEndpoint
Usage
Drivers derive from VideoMatrix and talk to hardware through a transport from AVCoders.CommunicationClients. See the repository README for full wiring, logging and tracing setup.
| Product | Versions Compatible and additional computed target framework versions. |
|---|---|
| .NET | net8.0 is compatible. net8.0-android was computed. net8.0-browser was computed. net8.0-ios was computed. net8.0-maccatalyst was computed. net8.0-macos was computed. net8.0-tvos was computed. net8.0-windows was computed. net9.0 was computed. net9.0-android was computed. net9.0-browser was computed. net9.0-ios was computed. net9.0-maccatalyst was computed. net9.0-macos was computed. net9.0-tvos was computed. net9.0-windows was computed. net10.0 is compatible. net10.0-android was computed. net10.0-browser was computed. net10.0-ios was computed. net10.0-maccatalyst was computed. net10.0-macos was computed. net10.0-tvos was computed. net10.0-windows was computed. |
-
net10.0
- AVCoders.Core (>= 2026.10.1)
-
net8.0
- AVCoders.Core (>= 2026.10.1)
NuGet packages (2)
Showing the top 2 NuGet packages that depend on AVCoders.Matrix:
| Package | Downloads |
|---|---|
|
AVCoders.Crestron.TouchPanel
Touch panel menu and UI helpers for Crestron panels: display, motor, AVoIP, sync, level, PDU and Q-SYS source menus, PIN entry, confirmation and status pages. |
|
|
AVCoders.Crestron.Matrix
Crestron NVX AV-over-IP endpoint wrappers for the AV Coders device library, with encoder and decoder support including the 36x and Exx series. |
GitHub repositories
This package is not used by any popular GitHub repositories.
| Version | Downloads | Last Updated |
|---|---|---|
| 2026.10.1 | 0 | 10/6/2026 |
| 2026.9.8 | 78 | 9/29/2026 |
| 2026.9.7 | 94 | 9/24/2026 |
| 2026.9.6 | 95 | 9/18/2026 |
| 2026.9.5 | 87 | 9/17/2026 |
| 2026.9.4 | 162 | 9/14/2026 |
| 2026.9.2 | 98 | 9/2/2026 |
| 2026.9.1 | 102 | 9/2/2026 |
| 2026.8.5 | 108 | 8/27/2026 |
| 2026.8.4 | 116 | 8/26/2026 |
| 2026.8.3 | 110 | 8/26/2026 |
| 2026.8.2 | 110 | 8/24/2026 |
| 2026.8.1 | 166 | 8/11/2026 |
| 2026.7.3 | 132 | 7/22/2026 |
| 2026.7.2 | 164 | 7/21/2026 |
| 2026.7.1 | 110 | 7/20/2026 |