WatchDog.Echo 1.0.0

WatchDog.Echo

Introduction

WatchDog.Echo is a light-weight monitoring and observability tool that helps to validate interoperability between services by notifying developers or project owners when a particular service B is not reachable from a service A, or a list of services are not reachable from a service. It leverages both/either gRPC and REST protocols to send echos between these services and sends alert/notification via Email or to Slack, Microsoft Teams and Discord channels on the event that a particular service is not reachable, enabling developers/projects owners detect service downtime promptly. This package currently targets .Net Core 3.1 and .Net 6.

General Features

• Check interoperability between services
• Webhook Notification (Slack, Discord, Microsoft Teams etc)
• Email Notification
• Customizable Echo and alert intervals
• Protocol Options (REST or gRPC)

Support

• .NET Core 3.1 and newer

Installation

Install via .NET CLI

dotnet add package WatchDog.Echo --version 1.0.0

Install via Package Manager

Install-Package WatchDog.Echo --version 1.0.0

Initialization

To enable WatchDog.Echo communicate with other services,

Add WatchDog.Echo Namespace in Startup.cs or Program.cs

using WatchDog.Echo;

Register WatchDog.Echo service in Startup.cs or Program.cs

For .Net Core 3.1

services.AddWatchDogEchoServices();

For .Net 6

builder.Services.AddWatchDogEchoServices();

Usage Configurations

Client Host - Required

URL of the current service

builder.Services.AddWatchDogEchoServices(opt =>
{
    opt.ClientHost = "https://localhost:7068";
});

Protocol - Optional

Communication Protocol for the service

builder.Services.AddWatchDogEchoServices(opt =>
{
    opt.Protocol = ProtocolEnum.REST; 
});

Default = gRPC

NOTE: .NET 3.x service hosted on IIS should utilize REST as gRPC is not supported on IIS for .NET 3.x

Echo Interval - Optional

Time interval between each echo measured in minutes e.g. If set to 5, it sends an echo to all the services listed in the EchoTargetURLs every 5 mins

builder.Services.AddWatchDogEchoServices(opt =>
{
    opt.EchoIntervalInMinutes = 3; 
});

Default = 5 minutes

Failed Echo Interval - Optional

Time interval between each failed echo alert measured in minutes e.g. If set to 60, when an attempt to echo Service A fails, it sends an alert immediately and then if service A is still down after 60 minutes, it sends another alert. It continues sending an alert every 60 minutes until Service A is back up.

builder.Services.AddWatchDogEchoServices(opt =>
{
    opt.FailedEchoAlertIntervalInMinutes = 60;
});

Default = 45 minutes

Target URLs - Optional

Comma separated list of service URLs to be "Echoed" by the current service

builder.Services.AddWatchDogEchoServices(opt =>
{
    opt.EchoTargetURLs = "https://localhost:44362, https://payment.myserver.com"; 
});

WebhookURLs - Optional

Comma separated list of Webhook URLs for channels where echo alerts will be sent e.g. Slack, Microsoft Teams, Discord etc.

builder.Services.AddWatchDogEchoServices(opt =>
{
    opt.WebhookURLs = "https://hooks.slack.com/services/T00000/B000000/xxxxx, https://discord.com/api/webhooks/{id}/{token}";
});

NOTE: Follow this guide to create webhooks for Slack, Microsoft Teams and Discord

Email Addresses - Optional

Comma separated list of email addresses to receive alerts when a particular service is down

builder.Services.AddWatchDogEchoServices(opt =>
{
    opt.EmailAddresses = "something@gmail.com, nothing@outlook.com";
});

Mail Config - Optional

SMTP configuration to be used in sending email alerts

builder.Services.AddWatchDogEchoServices(opt =>
{
    opt.MailConfig = new WatchDog.Echo.src.Models.MailSettings
    {
        MailFrom = "nothing@gmail.com",
        MailHost = "in-v3.mailjet.com",,
        MailPort = 465,
        MailPubKey = "YOUR PUBLIC KEY",   
        MailSecKey = "YOUR SECRET KEY", 
    };
});

Custom Alert Webhook URL - Optional

Your custom web endpoint to be called if you wish to perform an external action when a service is down.

builder.Services.AddWatchDogEchoServices(opt =>
{
    opt.CustomAlertWebhookURL = "https://myserver.com/ProvisionNewServer)";
});

Json body to be received by your endpoint

{ 
    "Description": "https://myserver.com failed to respond to echo from https://server-b.com)", 
    "Response": "Unable to reach server", 
    "Server": "https://myserver.com", 
    "HappenedAt": "09/06/2022 11:38" 
}

Sample Echo Options

builder.Services.AddWatchDogEchoServices(opt =>
{
    opt.EchoIntervalInMinutes = 3; 
    opt.FailedEchoAlertIntervalInMinutes = 60;
    opt.ClientHost = "https://localhost:7068"; 
    opt.EchoTargetURLs = "https://localhost:44362"; 
    opt.Protocol = ProtocolEnum.REST; 
    opt.WebhookURLs = "https://hooks.slack.com/services/T00000/B000000/xxxxx, https://discord.com/api/webhooks/{id}/{token}";
    opt.CustomAlertWebhookURL = "https://myserver.com/ProvisionNewServer)"
    opt.EmailAddresses = "something@gmail.com, nothing@outlook.com";
    opt.MailConfig = new WatchDog.Echo.src.Models.MailSettings
    {
        MailFrom = "test",
        MailHost = "test",
        MailPort = 465,
        MailPubKey = "test",   
        MailSecKey = "test", 
    };
});

Setup in-app event notification Optional

If you decide to perform other actions during failed echos, you can subscribe to an OnEchoFailedEvent that is been sent for every failed echo.

Create a background service that will listen for this event by creating a class that implements the C# BackgroundService and subscribe to the event in the ExecuteAsync() method.

Add

using WatchDog.Echo.src.Events;

        protected override async Task ExecuteAsync(CancellationToken stoppingToken)
        {
            EchoEventPublisher.Instance.OnEchoFailedEvent += e_OnEventFailed;
            while (!stoppingToken.IsCancellationRequested)
            {
                _logger.LogInformation("Worker running at: {time}", DateTimeOffset.Now);

                await Task.Delay(1000, stoppingToken);
            }
        }
        
        static void e_OnEventFailed(object sender, EchoEventsArgs e)
        {
            //Handle Echo Failed Event
            Console.WriteLine("The host {0} couldnt reach {1}.", e.FromHost, e.ToHost);
        }

Side Notes

To manually check if your server is up and running, head to /echo, you should get a message that says "Echo is listening".

Example: https://myserver.com/echo

Contribution

Feel like something is missing? Fork the repo and send a PR.

Encountered a bug? Fork the repo and send a PR.

Alternatively, open an issue and we'll get to it as soon as we can.

Credit

Kelechi Onyekwere - Github Twitter

Israel Ulelu - Github Twitter