nanoFramework.Iot.Device.SparkFunLcd 1.1.864

Prefix Reserved
dotnet add package nanoFramework.Iot.Device.SparkFunLcd --version 1.1.864
                    
NuGet\Install-Package nanoFramework.Iot.Device.SparkFunLcd -Version 1.1.864
                    
This command is intended to be used within the Package Manager Console in Visual Studio, as it uses the NuGet module's version of Install-Package.
<PackageReference Include="nanoFramework.Iot.Device.SparkFunLcd" Version="1.1.864" />
                    
For projects that support PackageReference, copy this XML node into the project file to reference the package.
<PackageVersion Include="nanoFramework.Iot.Device.SparkFunLcd" Version="1.1.864" />
                    
Directory.Packages.props
<PackageReference Include="nanoFramework.Iot.Device.SparkFunLcd" />
                    
Project file
For projects that support Central Package Management (CPM), copy this XML node into the solution Directory.Packages.props file to version the package.
paket add nanoFramework.Iot.Device.SparkFunLcd --version 1.1.864
                    
#r "nuget: nanoFramework.Iot.Device.SparkFunLcd, 1.1.864"
                    
#r directive can be used in F# Interactive and Polyglot Notebooks. Copy this into the interactive tool or source code of the script to reference the package.
#addin nuget:?package=nanoFramework.Iot.Device.SparkFunLcd&version=1.1.864
                    
Install nanoFramework.Iot.Device.SparkFunLcd as a Cake Addin
#tool nuget:?package=nanoFramework.Iot.Device.SparkFunLcd&version=1.1.864
                    
Install nanoFramework.Iot.Device.SparkFunLcd as a Cake Tool

LCD library for SparkFun RGB Serial Open LCD display (sizes 20x4 or 16x2) with I2C connection

Use SparkFunLcd.cs to drive SparkFun LCD modules via I2C.

For example product information see SparkFun LCD-16398

The code contained in this driver is based on see OpenLCD

Usage

For instance the following code writes a simple message to the display,

var settings = new I2cConnectionSettings(busId: 1, deviceAddress: SparkFunLcd.DefaultI2cAddress, busSpeed: I2cBusSpeed.StandardMode);
using (var i2cDevice = I2cDevice.Create(settings))
{
    using (var lcd = new SparkFunLcd(i2cDevice, SparkFunLcd.DisplaySizeEnum.Size20x4))
    {
        lcd.SetBacklight(Color.FromArgb(0, 255, 0));
        lcd.SetContrast(4);
        lcd.SetDisplayState(false);
        lcd.Clear();
        lcd.Write(0, 0, "SparkFun 20x4 SerLCD");
        lcd.Write(0, 1, "P/N# LCD-16398");
        lcd.SetDisplayState(true);
    }
}

(code validated against Adafruit Huzzah32 Feather)

Example usage

Custom Characters

  • As shown in the photo above custom characters can be defined
  • Up to eight custom characters can be defined numbered 0x0 thru 0x7
  • for information on generating the byte array character bit mask see link
// demonstrating custom characters
{
    lcd.CreateCustomCharacter(0, new byte[] { 0x0, 0x1b, 0xe, 0x4, 0xe, 0x1b, 0x0, 0x0 }); // define custom character 0x0
    lcd.CreateCustomCharacter(1, new byte[] { 0x0, 0x1, 0x3, 0x16, 0x1c, 0x8, 0x0, 0x0 }); // define custom character 0x1

    lcd.Clear();
    lcd.SetCursorPosition(0, 0);
    lcd.Write(new char[] { '\x0', '\x1' }); // write custom character 0x0 followed by custom character 0x1
}

Important note on use of I2C pins

Important: make sure chip pins are properly configured as I2C pins, for instance for ESP32,

// configure ESP32 device I2C bus
{
    // note: actual pin-out is specific to Adafruit Huzzah32 Feather on which code was tested
    int dataPin = Gpio.IO23;
    int clockPin = Gpio.IO22;
    Configuration.SetPinFunction(dataPin, DeviceFunction.I2C1_DATA);
    Configuration.SetPinFunction(clockPin, DeviceFunction.I2C1_CLOCK);
}
Product Compatible and additional computed target framework versions.
.NET Framework net is compatible. 
Compatible target framework(s)
Included target framework(s) (in package)
Learn more about Target Frameworks and .NET Standard.

NuGet packages

This package is not used by any NuGet packages.

GitHub repositories

This package is not used by any popular GitHub repositories.

Version Downloads Last updated
1.1.864 167 4/2/2025
1.1.852 177 3/11/2025
1.1.822 120 2/26/2025
1.1.772 128 2/4/2025
1.1.755 124 1/31/2025
1.1.737 101 1/13/2025
1.1.696 115 12/16/2024
1.1.673 119 10/23/2024
1.1.665 114 10/16/2024
1.1.662 113 10/11/2024
1.1.651 116 9/27/2024
1.1.631 130 8/28/2024
1.1.580 136 6/28/2024
1.1.570 138 6/14/2024
1.1.548 137 5/15/2024
1.1.436 248 11/10/2023
1.1.435 124 11/10/2023
1.1.429 104 11/10/2023
1.1.329 186 5/26/2023
1.1.313 161 5/12/2023
1.1.308 158 5/11/2023
1.1.304 169 5/10/2023
1.1.297 171 5/3/2023
1.1.222 325 1/9/2023
1.1.212 318 1/5/2023
1.1.208 312 1/3/2023
1.1.203 312 12/28/2022
1.1.159 392 11/14/2022
1.1.153 391 11/5/2022
1.1.141 406 10/25/2022
1.1.128 399 10/22/2022
1.1.87 498 9/15/2022
1.1.82 490 9/14/2022
1.0.30.8772 454 6/24/2022
1.0.27.2032 434 6/23/2022
1.0.1.45819 431 6/7/2022